Quote from: lasttimei on Today at 05:08:06 PM

Quote from: jelome198959 on Today at 12:09:12 PM

Just noticed if I set the fans to auto on my Zotac, at 32c ambient fans went straight up to 100%. Definitely on the throttling side. I deshrouded it and zip tied 2x 140mm fans and according to HWINFO, fans are now at 75%. Went down from 100% to 75%. Big help. Let's see if this holds at 35c summer temps. Also checked the pads of the Zotac Amp Holo --- they are 2mm. Will replace the pads later if this still doesn't hold.

Quote from: lasttimei on January 23, 2021, 11:50:44 PM

Yeah tried that atm i've a ryzen cpu heatsink at the top and it works somewhat, but i think ima try the thermal pad mod , just hope that the 2mm works fine.

How does this work? I mean how did you mount the heatsink?

Quote from: Seph213 on January 23, 2021, 09:24:23 PM

My 3080’s are not thermal throttling but i did notice the backplate is super hot where the memory and vrams are located so i put a 120mm case fan on there .

Now its just warm to the touch not burning anymore .

Maybe try that and see if it fixes ur problem before u open ur card .

Can you please post pictures? Kinda interested how you did it

i just dropped a cheap ryzen heatsink on top of it still not fixed but lowered temps a bit.

I think this would work better if you dont want to open your card.
This has to be a 3090 since there's no way a 120mm fan would fit, unless its smaller fan.
Got this image from a search,
https://imgur.com/gallery/tkLoZnt

I'm going to be trying something like this
https://i.imgur.com/ZkaRTbs.jpg

I'm not opening the front looks like too much work, just the backside.
unless this doesn't fix it.

My 3080FTW3 i think its probably the best card it can be really hot and it still pushes 100mhs.
Should be getting a few strix 3080 hope thats also good with memory cooling.
and another FE -_-probably selling it to a friend if i cant fix this one.

Have u put thermal pads under those heatsinks ? I was thinking of doing that but the fan fix did it for me cause i don’t have an FE and the mlcc area is open so air gets through to the mem/vram