Quote from: th00ber on Today at 10:09:17 AM

Quote from: Sledge0001 on Today at 12:42:53 AM

If you choose to use 2 PSU's then you need to make damn good and sure that you select a single PSU to power up both the riser and GPU. DO NOT mix the power sources on risers and GPU's or you can cause damage to your equipment and possibly start a fire!

So true !

https://www.thegeekpub.com/11955/using-dual-power-supplies-mining/

The key is :
Everything you plug on the MB comes from one PSU (24 pin, CPU pin, molex etc ...)
Everything you plug for a GPU comes from one PSU (Riser power + 6/8 pins PCI-E connector to GPU)

So you will not mix the ground of the 2 PSU and everything will be fine

Very useful article thank you! I was not aware that you couldn't mix and match psu connection with the GPU and mobo.

So basically I'll use the first psu for the mobo and 4 GPU/Risers. Then use the second psu isolated on the other 4 GPU/Riser pairs. This should be ok?