Quote from: OrangePower on February 20, 2021, 08:07:56 PM

Quote from: nik-qz on February 09, 2021, 06:01:33 PM

Quote from: OrangePower on February 08, 2021, 01:35:39 PM

Hi

I`m new to mining with TRM and I want to try it.

How do I setup TRM with these options I have in phoenix miner?

I`m using 8pcs rx580 8GB cards with hynix memory and i`m getting 32mhs in phoenixminer with this setup:

-lidag 2 -tt 55 -fanmin 40 -fanmax 75 -rxboost 1 -cclock 1200 -mclock 2250 -cvddc 840 -mvddc 860 -r 1

Thank you for help!

C:\Miner\AMD_Memory\WinAMDTweak.exe --i 0 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 1 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 2 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 3 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 4 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 5 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 6 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 7 --ref 30

C:\Miner\ATIWinFlashBios2.9.3\OverdriveNTool2.9.exe -ac1 GPU_P7=1200;840 MEM_P2=2250;860 -ac2 GPU_P7=1200;840 MEM_P2=2250;860 -ac3 GPU_P7=1200;840 MEM_P2=2250;860 -ac4 GPU_P7=1200;840 MEM_P2=2250;860 -ac5 GPU_P7=1200;840 MEM_P2=2250;860 -ac6 GPU_P7=1200;840 MEM_P2=2250;860 -ac7 GPU_P7=1200;840 MEM_P2=2250;860 -ac8 GPU_P7=1200;840 MEM_P2=2250;860

the countdown starts with -ac1 if you have a graphics core built into the processor, or with -ac0 if there is none

C:\Miner\TeamRedMiner\teamredminer.exe --enable_compute --uac -a ethash --pool_force_ensub -o stratum+tcp://your_pool:port -u 0x***********.your_name_rig -p x --init_style=1 or 2 or 3 --eth_dag_slowdown=4 (0-9 similar to -lidag) --eth_worker your_name_rig --eth_stratum_mode=(ethproxy or nicehash or stratum) --eth_variant_mode=ethash --eth_alloc_epoch=10 --eth_config=A --temp_limit=63 --temp_resume=50 --fan_control=58:70:80:50:1:100 --fan_default_polaris=58:70:80:50:1:100

where --fan_control=core:junc:mem:fan start:fan min:fan max

Thank you for advice but I cant set up miner, one big problem is that google translate does not translate from rusian language.

I see that I need one SW for setting tunning and then miner to mine. But in miner there is also a lot of options activated and I dont know if I must use all of them.

you will need several programs in this minus THREE but otherwise only the pros, the ATI driver is not higher than 20.5.1 otherwise OverdriveNTool2. 9 will not work, all the commands in this file are described USAGE.txt, also, before starting, you will need to run the file register windows_tdr_fix.reg once , an example of the commands below. The presented commands are almost the minimum necessary set, i.e. it is better to use them