Quote from: xstr8guy on March 11, 2014, 06:13:43 AM

Quote from: dannymack on March 11, 2014, 05:53:54 AM

Quote from: alexrossi on March 10, 2014, 07:02:37 PM

Quote from: dannymack on March 10, 2014, 07:00:21 PM

Quote from: Rock6.3 on March 10, 2014, 02:52:30 PM

Quote from: dannymack on March 10, 2014, 02:46:17 PM

Can someone please point me in the right direction for the best thread on how to power this puppy?

Just got the S1 today and also got the following power supply:

EVGA 600B 80PLUS Bronze Certified ATX12V/EPS12V Active PFC 600W Power Supply 100-B1-0600-KR
http://www.amazon.com/EVGA-80PLUS-Bronze-Certified-100-B1-0600-KR/dp/B00EON40CS/ref=sr_1_1?s=pc&ie=UTF8&qid=1394461405&sr=1-1&keywords=power+supply

1) Am I going to need more than what it comes with?
2) I plan on buying another...could this power both or do i need to power another?
3) Is there a guide for dummies on how to hook up? I only have easy miners like avalons and such....I'm having a hard time understanding other instruction threads and they all give different advice

Thanks

Danny

You will need a paper clip to jumper the psu to turn it on.
No, you cannot power 2 AntminerS1's from a 600W psu.

All I have to do is the jumper? I don't have to cut and splice pci wires and all that?

No, becouse now S1 has two pci-ex

crap...that psu above only has one 6 pin pie...well threre's another tethered to it, but it doesn't reach. I'mm guessing it wouldn't matter because the 2nd one would need it's own, right?

There other connector it has is a cpu molex...two four-in connectors with yellow on the clip side. Can this help me?
Do I simply extend the other tethered six pin

There's another sata cable that has for 4 pin flat molex...i have an adapter that can turn that into a six...should I use that?

Return it and buy a real[/] PSU.

alternatively, you can snip the head off the 8-pin ATX mobo connector and it will give you moe then enough wire leads to wire to the screw terminals on the unit