Quote from: skinnyfalcon on February 19, 2021, 08:25:48 PM

Quote from: xandefurtado on February 19, 2021, 08:02:33 PM

Hey guys,

After successfully tweaked a RX 480 8gb to do ~29 mh/s @ 85w, I got hands at a RX 5600 Asrock, with with the following settings:

- cclock= 1400 MHz
- cvddc= 930 mV
- mclock= 1800 MHz
- mvddc= 850 mV

Getting 39.143 MH/s and Effective speed @ ethermine ~ 39.73- 45 mh/s, consuming 103w and 200w @ the wall.

And it's stable for about 49 hours straight.

Does someone has a better config? I was playing around on some clocks and vddc but this are the only ones that I found that were stable enough to make through a +24hrs.

FYI, just waiting for some risers to throw the both AMD's and a Gigabyte 1060 on a rig Grin

I'm pretty sure you can get 41 mh and under 60W power draw with 5600

Yeah I can get that sweet 41, although its not stable, and rn i'm trying to avoid some bios mod, and the energy is not a "problem", cause I got solar panels powering my hole house, and I would try to reduce perhaps the voltage and core clock to try to get some lower temps..