Quote from: f03_h4mm3r on Today at 12:57:55 PM

Quote from: Bathmat on March 05, 2021, 10:35:18 PM

What is Phoenix Miner reporting as the hashrate for each rig? Did you switch to compute mode? Did you mod the GPU BIOS with timing straps or use strap injection? Did you set core and memory clocks for mining or just using stock clocks? There are more steps required to get 30Mh/s than just turn the miner on and let it run.

After finding the compute mode setting, and restarting the mining in compute mode, my hashrates have gone up to 19-23Mh/s, each rig is slightly different. These hashrates are much more in-line with what I was expecting. This was the piece of info I was missing.

Thank you!

No problem. From your other question, yes, by setting core and memory clock, I meant overclocking the GPU. Although, for ETH you probably want over clock the memory and under clock the core. Even with stock timings, you can get around 24-25Mh/s per GPU with the correct clocks. There are several guides on how to start mining (some even in this forum), if you just do a little searching and research.