Quote from: jgonzi on March 19, 2021, 09:24:39 PM

Quote from: Seph213 on March 19, 2021, 05:39:18 PM

Quote from: Erpelusas on March 19, 2021, 08:03:54 AM

Quote from: Wotan Wipeout on March 17, 2021, 09:00:57 AM

I got my EKWB Blocks for the Supreme X yesterday.
Just want to inform all that the pads might be too thin.
1. GPU Asus TUF 62 degrees (watercooled)
2. GPU MSI Supreme X 96 degrees (watercooled) and still slowly rising.

Just did a second try and it didnt change the temp.
But i recognized nearly no imprint of the rams in the pads.
I should have 1.5mm here for a 3. try.
EKWB sends only 1mm pads.

So after mounting of the block, check the ram temp with hwinfo....

Edit:

Changing the lonely ram pad at the 16x PCI-E from 1mm to 1.5mm dropped the ram temp by 30 degrees.
Sounds unbelievable but is true...

Edit:

RAM +1149 = 99 MH/s
RAM +1200 = 99.4 MH/s
RAM +1300 > 100 MH/s

Core 1275 MHz ( too lazy to drop it more)
VCore 0,731
Power 234 Watt
Ram Temp 78 degress
Phoenix miner

Goal achieved Grin

Phoenixminer, inflate the hash. You don't have a real hash.

I use phoenixminer and my hash is the same as reported on the pool side . How u explain that if phoenixminer inflates the hashrate .

The pool hash must be the same of course but the pool with the hash show it quiite higher around a 3%

I don’t get what u said