Quote from: Lkokra on May 10, 2021, 08:19:54 PM

Quote from: batsonxl on May 10, 2021, 03:38:45 PM

Quote from: Lkokra on May 10, 2021, 10:07:58 AM

Quote from: batsonxl on May 05, 2021, 10:17:44 AM

Quote from: Lkokra on May 04, 2021, 08:52:33 PM

Hello,

I have AMD RX580 8 GB with the driver 21.4.1 also phoenixminer 5.6b which would be perfect for this driver BUT there is one problem when I Tune my GPU and turn of FANS on 50% every time it crush in like 10 or 15 minutes later I don't know what's going on also this problem was early drivers and the AMD error Say "We detected a driver timeout has occurred on your system. A bug report has been generated. This report could help AMD find a solution... " Compute mode is turned ON... The miner working on Windows 10...

any ideas? please help me <3

Never forget this: In mining not always latest drivers means best. There must be time devs can upgrade miners after that you can use.
For example myself using 5.4c with driver 20.11.1 i will not change until long period,
Download 20.11.1 driver and try again. and also if you share bat file you will get more help.

I tried it and there is a bug report again I am sharing bat file
-amd -gt 63 -daglim 3950 -mt 2 -rxboost 20 -cclock 1175 -cvddc 850

I want to max my hashrate because i have 28.5 and 100W i know that it is not good Can anyone help me you can add me on facebook or somewhere else where you can chat me to configure this problem please ^_^ i can't mine it :/

Did you installed right driver? What card is it? 470 480 570 580 what card? Windows?
Delete your command and start with this : -cclock 1150 -cvddc 920 -mclock 2050 -mvddc 920 -rxboost 1 -mt 1
if it is stable you can increase mclock then decrease voltage until it crashes.

yes i installed right driver 20.11.1 and 5.4c phoenixminer... but i have about 28 MH/s for 100W why ?
i don't know really i have xfx rx580 8 gb card i know that there must be at least 30-31 mh/s with 70W- 80W for per card
also yes Windows ...

30-31mh/s even 32 are for RX580 with custom bios.
rxboost increases power consumption.
If you're using the GPU to output video to a monitor you can get lower rashrate.
Se if the memory clock has a lower state than 2000MHz on the radeon settings, if it does, set the 2000MHz as the lowest state and try generating the DAG again. Sometimes generating dag at a lower clock gets you a lower hashrate.
remove the -gt value, and the -rxboost value, try those commands without a value and see at which value they settle.