Quote from: stan258 on March 14, 2014, 09:33:21 PM

Quote from: xunknownx on March 14, 2014, 07:46:05 PM

Quote from: HashFast_CL on March 13, 2014, 06:41:58 AM

Quote from: phreakk on March 10, 2014, 04:47:32 PM

Quote from: regular on March 09, 2014, 07:13:16 PM

Did anyone find the self updating rPI image not work for them? I plugged in the HDMI cable and the image boots up archlinux but then shuts down on its own despite having the BJ plugged in. No mention of any flashing of the firmware at all.

Same thing happens to me...

The rPi updater doesn't say much in terms of output. I just look at the lights. Plug in the rPi, wait about 20 seconds for it to boot, then plug in the BJ. The lights should start flashing for about 10 seconds. When they stop twinkling, it's finished.

so where can i go to CONFIRM that it actually completed sucessfully and that im running 0.4

Miner crash every hr or so? No then yes your good.

-------------- EDIT Its Ebay time for mine.

I had the same problem, apparently the memory card is somewhat loose in Rpi, then you place a piece of cardboard to fit better and it works, so far ...