Quote from: DumaDoo on March 15, 2014, 11:01:20 PM

Quote from: crushed on March 15, 2014, 10:29:39 PM

HI all. I recently received an AntMiner. Everything seems ok from an access standpoint but it won't hash. Poking around seems to indicate that DNS is not resolving. I can't get any name resolution when SSH'd into the box. I've been through the various configuration/troubleshooting guides and researching on the forums. I've tried the recommended NTP settings, DNS settings, hard reset, etc. My network config is as follows:

Router: 192.168.1.1
DNS: 192.168.1.1

Ant Config:

IP: 192.168.1.99
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Broadcast: blank
DNS: 8.8.8.8, 192.168.1.1

Any ideas what other configuration settings I need to review/check?

Thanks

Did you try changing the Ant IP address or switching it to DHCP protocol...

could also mean that your antminer isn't connected to the internet? so check LAN and WAN

Change second DNS to 8.8.4.4, also check if you have NTP errors in your system log.
If you do then you need to manually SSH and change some settings. (I can help you with that just drop me a PM).