Quote from: Jameous on June 07, 2021, 07:52:36 AM

Quote from: FalcaoFalcao on June 07, 2021, 03:04:12 AM

Hi, Jameous! Did you check if your GPU is in Compute mode in AMD Radeon Software instead of Graphics mode? (settings > Graphics > Advanced > GPU workload > compute) I've got an RX 570 and I'm getting about 30 MH/s. I'm using the following commands in the start_miner.bat file for the Binance pool:

...
Hope this helps,

Falcão

[edit]

By the way, my setup is pretty old :

Asus Rampage 3 Extreme (over 12 years old)

i7 965 OC to 3.6 MHz

6 GB of DDR3 RAM @1333 MHz

[edit 2]

Just did a little research on your MOBO and it is as old as mine, same cpu socket (LGA 1366) and chipset (X 58), so I'd guess your issues are in fact related to your GPU's settings

Yes, I've tried everything. First off, compute mode does not appear in MY ATI settings, IF it even fully launches! It gets stuck and have to shut down and reboot. I'm on 21.4.1, so it should be there, and I looked on a computer running a RX470, and it was there, so I know where it is. I can set it with some program I found from somewhere, AND I have my script in PM do it to when it launches, and that does nothing. (I've tried the mining driver, and a doz others and still nothing changes it)

I've OC and UV'd, and that helps a bit, but only from low 9s to sometimes high 9s.

I've also tried some BIOS mods that were custom made for my card and those just shut everything down after a few seconds, and no, not heat related as it never got above 55c.

I just checked your mobo and it has "PCI Express 3.0 x4 M.2", so, thanks for the try, but that does not answer my question about PCIe 2.0 mobo being my issue.

Maybe someone with an old moldy potato with PCIe 2.0 and a RX 580 can try to replicate, or has had this happen can chime in?

Thanks tho!

this is enabling compute for dev0:

Code:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]
"KMD_EnableInternalLargePage"=dword:00000002