@PhoenixMiner

Greetings all,
Was wondering if anyone out there who are using AMD RX5x cards are having this issue with the latest 5.7b release.

Every so often I get an email that my miner has stopped working. This can happen 2 or 3 times every couple hours.
When I check, my miner is working but these are spikes in the hash rate going from the normal about 167 MH/s to around 335 MH/s
then back to normal a few minutes later. I have tried with and without the -clKernel set to 1 and set to 3.
Tried many other changes also, but it consists. I dropped back to 5.6d and the issue goes away.
Thanks

Config File Settings:

Code:

-pool ssl://us1-etc.ethermine.org:5555
-pool2 ssl://eu1-etc.ethermine.org:5555
-wal 0xf6cXXXXX
-wal2 0xf6XXXXX
-worker Zilla-ETC-1
-worker2 Zilla-ETC-2
-coin etc
-coin2 etc
-rmode 2
-cclock 1275,1275,1275,1275,1275
-cvddc 945,955,945,945,945
-mclock 2153,2175,2170,2131,2149
-mvddc 955,955,955,955,955
-mi 14,14,14,14,14
-gt 38,37,36,39,38
-stales 1
-stales2 1
-fret 3
-ftimeout 600
-ptimeout 30
-retrydelay 5
-rate 1
-cdm 2
-cdmport 1234
-cdmpass MyPassword
-cdmrs
-amd
-acm
-clKernel 1,1,1,1,1
-clgreen 0,0,0,0,0
-clNew 1,1,1,1,1
-clf 2,2,2,2,2
-mode 1,1,1,1,1
-gbase 1
-minRigSpeed 140
-eres 2,2,2,2,2
-dagrestart 2
-lidag 1,1,1,1,1
-gser 0
-gpureset 0,0,0,0,0
-rvram -1
-wdog 1
-wdtimeout 60
-log 1
-logfile ETC_Log-*.txt
-logdir c:\miners\phoenix\logs
-logsmaxsize 100
-gswin 15
-gsi 15
-astats 1
-hwm 2
-hstats 2
-tt 65,65,65,65,65
-prate 0.05
-fanmin 25
-fanmax 80
-fcm 0
-tmax 0
-tstop 70
-tstart 50
-mt 0
-ttli 69
-vmr 48,48,48,48,48