Quote from: NilBit on March 19, 2014, 07:55:01 PM

If you change the value 384 into 1152 in this line of procs.awk, then it seems to work for a 6 module miner:

Code:

for( y=1 ; y <= 384 ; y++) {

Just running very briefly after restart to test:

Code:

die Mh/s HW% min max Volt Amp Watt Gh/W
0_0 646.56 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 31.035
0_1 609.13 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 29.238
0_2 595.10 1.389 ( 0.00 / 66.67 ) 1.00 1.00 1.00 28.565
0_3 625.97 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 30.046
40.0 C
1_0 684.10 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 32.837
1_1 606.42 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 29.108
1_2 632.37 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 30.354
1_3 563.11 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 27.029
41.0 C
2_0 629.06 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 30.195
2_1 670.99 1.389 ( 0.00 / 66.67 ) 1.00 1.00 1.00 32.208
2_2 563.07 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 27.027
2_3 609.80 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 29.270
44.5 C
3_0 669.40 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 32.131
3_1 594.51 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 28.536
3_2 634.89 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 30.475
3_3 567.33 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 27.232
48.0 C
4_0 599.24 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 28.763
4_1 650.87 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 31.242
4_2 565.48 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 27.143
4_3 689.70 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 33.105
43.0 C
5_0 573.87 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 27.546
5_1 698.01 0.260 ( 0.00 / 12.50 ) 1.00 1.00 1.00 33.504
5_2 506.54 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 24.314
5_3 661.96 0.000 ( 0.00 / 0.00 ) 1.00 1.00 1.00 31.774
45.0 C

Great stuff.

Oops
Shoulda been PGAct instead of 384
That should work even for 6 ASIC installed

Will edit above...

Still not ready for prime time, but hopefully useful!

YMMV