Quote from: moesab on March 20, 2014, 05:05:51 PM

Quote from: ermyerok on March 20, 2014, 03:33:12 PM

I recieved my ant miner s1 today ( second one ) and set it from 192.168.1.99 to 192.168.1.242
I then tried to set up the wireless to connect but it kept going on and off so i turned the wireless off ( or so i thought ) and ended up turning the lan connection off....... yer i know stupid and not paying attention.
I read up about the hard reset button but it don't to do anything or reset back to its default of 192.168.1.99
so im stuck with a miner that can connect to anything or reset.
Any help would be very much appreciated and a donation will be made
Thank you

While I had problems Sushi gave me the following directions for a hard reset:

WHILE ANTMINER IS POWERED ON, PLEASE PRESS AND HOLD THE RESET BUTTON FOR AT LEAST 5 SECONDS INTO 10 SECONDS
THEN LET IT GO, WAIT FOR 2 MINUTES, THEN PRESS AND HOLD THE RESET BUTTON AGAIN FOR 10 SECONDS, LET IT GO, WAIT FOR 2 MINUTES, THEN THRUN IT OFF, WAIT FOR 30 SECONDS THEN TURN IT BACK ON

You can watch the lights, a reset will make them all go out then blink as it boots up the OS if after a minute or so the network light doesnt go green just reset it again.
I've had 2 that needed to be reset twice in a row to complete the default replacement reset.