Quote from: kerney666 on October 03, 2021, 10:52:51 PM

Quote from: nik-qz on September 18, 2021, 09:39:55 AM

Quote from: kerney666 on September 17, 2021, 10:02:09 PM

Quote from: nik-qz on September 14, 2021, 10:28:23 AM

Quote from: nik-qz on September 07, 2021, 08:33:48 AM

launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4

when activating the option --fan_control = 63 ::: 50: 1: 90 in version 8.5, the program does not start if there are 5700 video cards , fix it otherwise it is impossible to control the fans

Interesting, can you tell me what driver version you're on and I'll try to reproduce?

of course ATI_AdrenalinDrivers20.5.1. OverdriveNTool2.9 works with these drivers, so I use them

I believe I reproduced this issue and it will be fixed in 0.8.6, released in a few days from now. I'll downgrade to 20.5.1 myself tomorrow and test as well to verify.

thx, this problem has disappeared
BUT now another has appeared
bought a big navi 6800 video card and does not want to control the speed with the options --fan_control = 50: 60: 80: 30: 30: 90 fan_default_big_navi = 50: 60: 80: 30: 1: 90
when I start the rig with the fan_control option, then immediately the fan speed is reset to 0 and is not controlled by temperature and is constantly in this position, but if I remove the fan_control option and leave only fan_default_big_navi, then the speed decreases smoothly to the minimum stitched in the BIOS about 20% and also without control.
tried on version 0.8.5. and 0.8.6 driver 20.12.2, note that I also use the MTP program overlaying some settings in the SPPT