Quote from: Artemis3 on October 08, 2021, 11:08:09 PM

Braiins OS+ 21.09 release: new features and beta for S19, T19 & S19 Pro
Braiins | pool, firmware & protocol

Major release that overhauls the web interface, adds languages and features
Early access for beta testers of S19, T19 & S19 Pro - see the dedicated section below

http://images2.imgbox.com/c4/40/7K2VhxUb_o.png

New features for all models:

[feature] new web interface, with responsive design (mobile ready), dark mode and multi-languages support (ES, RU, FA, ZH)
[feature] firmware running from SD card now support upgrade and auto-upgrade (same as firmware running from internal NAND memory)
[feature] firmware automatically pauses mining if there are no online pools in your settings, minimizing the power consumption and will automatically start mining once at least one pool comes online
[x17 specific feature] Improved Model Detection functionality, to cover situations where all 3 hashboards have invalid EEPROMs from a different model. Scenario: you have a second hand S17 and the previous owner has rewritten the hashboard EEPROMs with T17e profiles

Known Issues:

Kaspersky Antivirus may block the web GUI
[S9] Wrong DPS default minimum power limit value = 100 W
[x19] Sometimes invalid Power usage data
[x19] Inconsistency in data shown in GUI Dashboard
[x19] No chip temperature in GUI Dashboard

S19, T19 & S19 Pro - EARLY ACCESS

Installation:

EARLY ACCESS Antminer S19, T19 & S19 Pro: to run the firmware on x19, replace the x19 control board with an x17 control board. Note that the C49 control board (used in S17/Pro and T17) has smaller dimensions and the cables might not be long enough to reach the hash boards of the x19. Continue with the standard x17 installation method (SD card method) or update the firmware to 21.09 if Braiins OS+ is already installed on the control board. The 21.09 firmware will detect whether it is being installed on an x19 (with x17 control board) model. You can always revert back to stock firmware for x17 on that control board. An alternative installation method will be available for the official public release.

For new installation from Stock firmware (x17 & S9): see documentation.

Automatic update:

if your current Braiins OS+ has auto-update enabled your device will be updated automatically.

Manual update:

You can also update using the web interface: flash the firmware by navigating to top-menu > System > Backup/Flash Firmware > Flash new firmware image >
S9 (click here to download) or x17 (click here to download)
Update in single/batch mode using BOS Toolbox Install tab > type your device IP address (or IPlist.txt) in the Miner(s) field and type the device password and click Start button.

What type of performance increases numbers being seen in the 19's seen?