Quote from: miner29 on October 16, 2021, 02:36:55 AM

Quote from: OlympicSSJ on October 15, 2021, 11:41:25 PM

Hi! Sorry for the off topic but I'm out of ideas! At least I'm using phoenix miner!

So, I bought 2x Tplink p100 smart plugs and have set 2x asrock motherboards 1. b450 steel legend, R5 3600 with 1x 1kw PSU, 2. x470 Master Sli R5 1600, 2x PSUs 1kw connected together. So both motherboards set to restore power after power loss, the first mobo starts as it should after switching the smart plug on, BUT the second x470 mobo only starts spinning bot PSUs fans... but nothing starts...no RBGs, no fans running, not even cpu fan, ONLY the 2 PSU fans are running. It only starts working properly after turning the rig on from the classic power button.

Anyone has any suggestion what the problem could be? Once again Im really sorry for the off topic and thanks in advance!
Cheers!

Have you tried swapping the units at the smart plugs?
If it follows the rig start there….if it stays at the plug replace it.
Then do the same for the psu’s and motherboards until you isolate what is causing the behavior.

Thanks for the reply! I found out someone had same problem with Asrock x470 motherboard and resolved it by updating the bios. So I gave it a try and updated from bios version 3.50 to 3.70 and this solved my problem!

Now the rig starts when power comes back, but the only problems is that windows shows that message before it enters into windows that the system didn't start up correctly and I should choose restart or actions to restore windows.
Its a bit of a bummer again because you cant log on with teamviewer and cant firgure out why the rig isn't booting...