Quote from: VRMdude on Today at 01:29:09 PM

Quote from: miner29 on Today at 01:26:18 PM

Quote from: VRMdude on Today at 01:19:06 PM

Quote from: masijjal on Today at 12:56:17 PM

The new version is finally ready. You can download PhoenixMiner 5.8c from here:

Changes in version 5.8c :

Full LHR disable mode -lhrdis <n> 1 - yes (default), 0 - no
Added lock core clock
Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
cclock -50 will set the core voltage to be 50 mV under the default value
Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
operation of these cards
Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8c

Dear mods,

this post above links to what i believe is a none official source of PhoenixMiner yet you delete my warning to it and leave it up?

What are you doing?

Has a scammer infiltrated your ranks or is PhoenixMiner back on Github without any notice? PhoeninxMiner was kicked off Github its well documented in this thread and the only official place to download PhoeixMiner is from there own website which is linked in the first post of this thread and copied below.

UNTIL VERIFIED OTHERWISE BY PM TAKE NOTE, DOWNLOADING PHOENIXMINER from any location other than "" is likely to ruin your week.

The following link appears to be a new github account and provided for reference it is an unknown repositary setup yesterday 24th Oct 2021 DO NOT DOWNLOAD FROM IT.

So you repost and include links to known malware. Reported is what you should have done…and thus your post has been.

Yes i reported the scammer post several times today and it is still there isnt it complete with links yet my post warning about it has been removed. For the record the links i posted are now disabled for safety and security purposes.

Merit for correcting and please dont post the links to the malware even with warnings. Best you can do is keep it reported. And merit for you for correcting it Wink