Quote from: dogie on March 23, 2014, 07:21:16 PM

Quote from: seminer on March 23, 2014, 06:34:29 PM

Hey Dogie,

this is seminer. I have been trying to set up my btc mining rig for 3 days now. Here is what I am working with:
msi z77A-G45 motherboard (1 ethernet plugin)

4-Avalon 2 single modules (~105 Gh/s)
4-Corsair cx 430 power supply units (psu)
1 TPLINK WR703N router with power, usb, ethernet inputs... ip address sticker reads: 192.168.1.201
1 4-slot usb hub (to connect each usb cable off of the avalon 2

Linux Xubuntu 12.10
BFGMiner 3.2.0. 64bit
cgminer 4.0.0. 64 bit
openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

I can not figure out how to set up the wr703N router. I can not connect to it. I type in http://192.168.0.100/ to google chrome browser and firefox browser and I get, "Oops! Google Chrome could not connect to 192.168.0.100"

I can not get to the Openwrt admin login settings. I can not configure the router for mining. I also need to figure out my new terminal command to start the avalon 2 mining. Or, if I set them up to mine, what happens if my pc powers down? I need more details and troubleshooting than this information, https://bitcointalk.org/index.php?topic=493358

I will compensate with useful help. Thank you.

I have no idea why you have a motherboard, its nothing to do with that.

It should be miners -> usb hub -> WR703N with WRT firmware. -> network cable to main router

The address assumes you already have a modified WR, if you don't then go to the default IP of the WR (likely the sticker, 192.168.1.201). Then flash the WRT firmware on. THEN go to 192.168.0.100.

Also remember that when you're trying to talk to different subnets, you'll need to change the subnet of your main router to match. Or, use 3)b) here http://www.dogiecoin.com/bitmain-antminer-s1.html with the last line changing to IP Address: 192.168.x.2, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.y.y (x being the subnet you want and y.y being the subnet and ip you want to target to reach the WR).

Hey Dogie,

I do not know how to change my subnet on my router. I tried plugging in my ethernet cable from the WR to my desktop. In Ubuntu, I opened Network Connections. I double-clicked auto ethernet. I clicked the Ipv4 settings tab. For the method, I chose manual. I added an "ip address of 192.168.1.2, a netmask of 255.255.255.0, and gateway of 192.168.1.2. I clicked on Require IPV4 addressing for this connection to complete, and then hit save. I tried to go to 192.168.1.201 WR address in google chrome and firefox and could not connect. I tried it by not requiring IPV4 addressing for this connection to complete. I tried it after rebooting my computer. I tried it by reconnecting the ethernet cable to my router. I do not understand how the ip address, subnet, and gatway addresses work. Thanks for trying to help tho.

Sincerely,

Seminer