Quote from: gtraah on March 24, 2014, 09:58:38 AM

Guys, Did you see my message I am using Kalroth 3.7.3 and all I changed from Sgminer 4.1.0 is From -i 20 To --xintensity 500 < Just experiment I was just testing Xintensity And I thought since the miner has stopped ths is my chance to try new settings as It took me so long just to get the Sgminer stable with 7 x 290x For some stupid reason all i was seeing is probing for alive pool, Yes I do have Failover set, not sure if the commands are like sgminer like I said the Batch file was exactly like cgminer I deleted the Config.cf as I was only using a Batch file... I have never used a config file... did I do something wrong here do I have to leave this file in the folder even though its not in use? It has default settings which came with the kalroth download and have nothing to do with my setup.. which is why I deleted it and trying to use a batch file.

So All I have is cgminer.exe -o stratum Bla bla bla -u afkhs;dfjhfg;ksfjghs -p x --xintensity 500 -g 1 -w 256 etc etc you get the point I hope....

I tried Middlecoin , Waffle, Multipool, Clevermining and they all said probing for alive pool.... And something interesting is I got AMD driver display crash after a few goes running the batch file with kalroth.. using the xintensity.. I am lost I am not at home now but some tips would be great, sorry for blabbing I just thought id message so that by the time I get home someone may give me some ideas on why this is happening or what it "was" happening for all i know when I get home everything will be back to normal I hope... but i am curious to know why this was happening and posibly still may be happening when i get back

I don't have any experience with a 290x and I'm going from memory so I might be way off and probably am, but as the 290x has 2816 stream processors, i=13 is roughly equivalent to xi=3, and i=20 roughly equivalent to x1=372. So if i=20 was working for you, then try xi=372 and then move up from there.