Quote from: rdluffy on Today at 02:24:21 PM

Quote from: Filippo Tognola on Today at 01:55:13 PM

Hi, I've tried running the GPU without overclocking settings and after 2 hours it still hasn't rebooted and remains stable at 32MH/s, so I think it's the fault of some overclocking settings.
The overclock settings I was using were:
Core clock: 1250
Memory clock: 870
Core Voltage: 725
Memory voltage: 1300
Memory control voltage: 800
Can you tell me what to change or why with these settings the rig restarts every 10 minutes and without it works fine?

Let it running for a couple of hours, just to be sure

It's simple, your card can't handle the settings you put on overclock, as I said, every card is different, each piece of silicon is different, even in same model of GPUs

Look at above, philipma1957 put his config

I have 5600XT too, Asus, with Micron memories, and my settings are:

Core clock - 1299
Memory clock - 925
Core voltage - 805
Memory voltage - 1325
Memory Controller voltage - 845

In your case I would do overclock step by step, put your clock at 1250 or 1300, and set your memory at 850, fan speed to 80% and everything else on stock, and you will test, if works, put more clock on memories, until crashes, and then get back 1 step to the last stable clock

After that, and only after that, you can change the rest of settings

thank you so much for your response and help, I really appreciate it.
I've already tried Philipma1957's settings, and the card would still reboot.
I must say that I am not an expert in the field of overclocking, I have always relied on models found online.
One thing I did not understand, is what it means to put the rest in stock. Does it mean don't put any memory voltage and memory control voltage fields?
Tonight I will try to do as you say, set core clock to 1300, put memory clock at 850 and the fan on 80%. and if it works I will increase the clock until it stops working right ?