Quote from: Filippo Tognola on Today at 02:40:24 PM

hello, I have a rig of 6 Sapphire Radeon RX 6600 Pulse cards (not XT), currently I use the default settings: core clock 950; memory clock 930 and core voltage 625. Memory voltage and memory control voltage I don’t have them set.
Currently I get 28.2MH/s per card and 50W of power consumption.
The fans are on 10% fixed, with a temperature of 50°C fixed.
Do you think it’s a good setting or you could do better, especially to preserve the GPU over time?

I really hate RX 6600. Everything is weird:

1. Setting is total different between HiveOS and Windows. On those system, they looks like different graphic card.

2. Driver almost in beta. I can't read SoC clock in windows, and there is no SoC VDD in HiveOS.

3. Setting and result maybe 2 different things, especially in Windows.

4. If some GPU crashed, windows will hang up in 1 hours, and reboot is not working. You can remote connect in and bemoan.

5. Run slower and slower in period time.

6. Every time start miner, you may get different hashrate. Or some card could drop it's hashrate when working.

Lot and lot problems here, but no miner developer care, because break through the LHR is hot, and the Big Navi is suck.

In finally, if you can get 28.2M "pool hashrate" at 50W and stable, it's really great.