Hi Guys,
I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN
I would appreciate if somebody can suggest a good OC for this combination.
Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?
Thanks
Hi Guys,
I am thinking of starting dual mining with my non LHR 3070s.
ETH+TONCOIN
I would appreciate if somebody can suggest a good OC for this combination.
Also, I would like to know what wallet are you using for TONCOIN and if pool suggested in .bat file is only and best option so far?
Thanks
Hello fellow miners,
So I figured out wallet and pool (whalestonpool)
Here is screenshot of miner after 1h:
https://i.imgur.com/eAvnjfy.pngFor some reason I cannot get 60Mh/s for ETH on first 4 cards. I checked clocks and they are all around same for all cards expect PL for some of them.
You should lock the core clock rather than using PL. If you using windows in the .bat file add '--cclk 1110' to extraparameters and it will lock the core. Set the memory speed to 1100 (I recommend MSI Afterburner in Windows) or 2200 in HiveOS and it should get you good results. You'll then need to work out the best memory overclock as it will depend on the card.
I have 2 3070s running in HiveOS with the core at 1110 and memory 2500 (That's about 1250 in windows) and I get just over 61MH/s with Eth and 1.1GH/s on TON with power usage around 140watts according to the software.
Adding a higher core clock might improve the TON speed but will also increase the power usage.
When mining Eth and TON make sure to restart the miner after applying any new overclocks.
Hope this helps.
