Quote from: itskeule on Today at 02:28:40 PM

Quote from: PiTimes on Today at 01:58:09 PM

Any one have some advice here? I am running out of ideas, rest of my Compac Fs run fine, this one did for a while too, now all of a sudden:

Code:

0: GSF 10050600: found 0 chip(s) | 0.000 / 0.000h/s WU:0.0/m

Cgminer keeps trying to start it:

Code:

2: GSF 10050600: found 0 chip(s) | OFF

Not sure where to go next, played with freq & voltage... reinstalled driver... Thanks in advance of any advice.

Change the USB hub and the PSU.

I got 5 others running on the same USB Hub... PSU is built in, it's the 20 port one. I've unplugged them all to test this one, tried hot plugging etc...

Code:

--------------------------------------------------------------------------------
[U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit
1: GSF 10050675: BM1397:01+ 450.00MHz T:450 P:449 (28:14) | 100% WU:100% | 334.9G / 255.3Gh/s WU:3566.2/m
2: GSF 10050690: BM1397:01+ 450.00MHz T:450 P:449 (28:14) | 100% WU:100% | 303.3G / 238.6Gh/s WU:3346.8/m
3: GSF 10050691: BM1397:01+ 450.00MHz T:450 P:446 (28:14) | 100% WU:100% | 372.5G / 252.3Gh/s WU:3531.9/m
4: GSF 10050692: BM1397:01+ 450.00MHz T:450 P:445 (28:14) | 100% WU:100% | 328.1G / 252.8Gh/s WU:3531.9/m
5: GSF 10050420: BM1397:01+ 450.00MHz T:450 P:450 (28:14) | 100% WU:^98% | 297.0G / 232.4Gh/s WU:3246.0/m
--------------------------------------------------------------------------------