Quote from: xref on March 28, 2014, 09:41:51 AM

alright, am using the GUI, the miner status shows me that its not mining, and i dont see cgminer running under processes.
this why i used ssh to run the cgminer, because i want to see what kind of error its encountering, its says no devices, no servers were found, wrong URL. dont know what the fuck is wrong with this.

Did you enter your pool parameters correctly? (I had a typo when entering my pool info, and it wouldn't mine, was in a mild state of panic as it is my first S1... double check that you entered it correctly)
You enter/modify your pool settings in Status, miner configuration (enter, then click 'save and apply', wait until the 'turning wheel' stops, then go to the miner status tab, and wait for the mining to start, it takes a while (usually the pool sees it before the WRT gui does).
On the System, software tab you should see that cgminer is installed (ver 3.12.0-1 on my one)
also on the System, startup tab you should see cgminer (at the bottom of my list).
On Status, processes you should see a line with cgminer, some options and your pool settings.
Do you see cgminer in all of these?
Perhaps you should try a system reset, or shut it down, remove power for a while, then start it from scratch.

Good luck