Quote from: elsupreme on March 09, 2022, 11:27:43 PM

Quote from: Biffa on March 09, 2022, 05:05:59 PM

Quote from: elsupreme on March 09, 2022, 01:36:49 PM

I am trying to pull up the default miner.php from cgminer on linux using my ip-address/miner.php i assume.

Am i doing it right ? Missing something ? Anyone ?

You need a web server with PHP running on the box.

If you have a standard Linux setup, you can check if apache is installed by just pointing a web browser at the ip address

If it isn't you need to install Apache and PHP

If it does work, you can copy miner.php the /var/www/html

Then you can try IP-address/miner.php

If that doesn't work you need to install PHP

Once installed and once you have edited miner.php you should be good to go.

Thanks. I had to install them all and i am at the miner.php edit phase currently...
abit tricky there.. what should i look out for to change in it ?

Sorry doing this by memory, I do have my miner.php working but its a while since I set it up.

AFAIK you have to set cgminer to listen for the connection

I run my cgminer using cgminer.conf in the ./.cgminer directory off my home directory.

And I have these two lines enabled

Code:

"api-listen" : true,
"api-allow" : "W:127.0.0.1"

If you are not using a conf file you can enable the API from the command line with:

Code:

--api-listen --api-allow W:127.0.0.1

Then the only thing to double check is in miner.php make sure $rigs = arrray('172.0.0.1:4028') is set up and pointing to the same port as your cgminer is using. (4028 is the default)