Quote from: mikeywith on March 25, 2022, 10:17:35 PM

Quote from: menoiazei on March 24, 2022, 05:35:07 PM

"boards have serial numbers and will not mix and match from different cases" that i thought that was the case lol Shocked

guess i have to trial and error to figure out now how to put everything together and what board goes to what miner...

learning process all the way!!!

Hey!!, don't even worry about that, only the stock firmware cares about that, vnish doesn't read the voltage stored in the EEPROM and thus you can mix and match boards all you want, I tend to believe all other custom firmware do the same, I just don't have a good experience with them, but I know vnish works.

Obviously, since you will need to disable the fans and overclock the miner, you won't be using the stock firmware either way.

Also, you have got a loose heatsink shown in this image, you have to solder it back on, I highly doubt you can get away with no-heatsink even with Immersion cooling.

Thanks for keeping this topic updated.

thanks for advice, will upgrade firmware and see what happens!