Quote from: P00P135 on April 02, 2022, 05:12:38 PM

Quote from: mensa8409 on April 02, 2022, 02:45:26 PM

Hello, I replaced the thermal pads now with 3.0 mm Thermalright Odyssey pads and memory temp went down from over 110C to 84C.

But the problem is, that now the other (first) temp is up 88C in about 5 seconds after starting t-rex miner. What is the problem now? I also replaced the thermal paste directly on the chip, like shown in that video: https://www.youtube.com/watch?v=z8KKYtiuu0I

My screenshot: https://i.imgur.com/3mNS4M0.png

Make sure you are using the proper sized thermal pads. Its usually 1mm-2mm for the front and 2-3mm for the back. If you use ones that are too big they will prevent the heatsink from making contact with the GPU to cool it properly.

Yes, this could be the problem. Also make sure none of your pads moved or folded when you were putting it back together. Your new temps are more concerning than your old temps to be honest. I would definitely crack it back open and have another look. As others have mentioned, your over/underclock settings have a lot to do with power usage and hashrate. I'd advise you to do some googling and read what settings other people are using to get their hashrate. You may find that you're able to increase your hashrate and decrease temps/power usage by fiddling with some adjustments on your settings. Hope that helps. Good luck!