Quote from: poby on Today at 03:50:24 AM

Quote from: philipma1957 on Today at 01:00:21 AM

op do you have a link

https://www.aliexpress.com/item/1005004263195778.html?spm=a2g0o.order_list.0.0.7d6c18028WYfAM

Quote from: arielbit on Today at 01:30:58 AM

If caps backs each other, like if 6 out of 10 is working and 4 are bad, the riser still works, then more is better. I think it acts as electrical noise filters.

The caps are there to smooth the voltage and are generally connected directly across the 12 volt line to ground. If a cap goes bad, it's not uncommon for it to short which would be disastrous, though a modern power supply might shutdown fast enough to avoid serious damage.

I'm not really keen on all this LED bling and wonder how many extra watts it will consume but the voltage and temperature displays might be useful. They are pretty cheap so I'm going to test them out and if I find out anything remarkable will update this thread.

In my mining since 2013, there was not 1 riser that killed a gpu., the soldering underneath the risers are getting better BTW.

Didn't check what temp display measures (sensor is located), all i care is the temp in the gpu. Temp in the mining room (specific spot, where rig/gpu is located), it will be useful if you are maxing the temp in your mining room.