Quote from: rorbit on April 03, 2014, 02:46:03 PM

Hi,

what's the best way to start LeaseRigProxy after a reboot?

I added the following line to /etc/crontab:

@reboot root /root/LeaseRigProxy/leaserigproxy_bamt 3333 ***LRP ID*** 0 >> /home/user/LeaseRigProxy.log

However, last night LeaseRigProxy got stuck in a loop and I ended up with a 450Mb text file log filled with this:

WARNING: Hostname ***pool***.com resolved to zero!
--127.0.0.1:60171->connecting to pool ***pool***.com
--127.0.0.1:60172->rig connected
WARNING: Hostname ***pool***.com resolved to zero!
--127.0.0.1:60172->connecting to pool ***pool***.com
--127.0.0.1:60173->rig connected
WARNING: Hostname ***pool***.com resolved to zero!
--127.0.0.1:60173->connecting to pool ***pool***.com
--127.0.0.1:60174->rig connected
WARNING: Hostname ***pool***.com resolved to zero!

cgminer was running without any errors just no hashing.

It didn't even go to the secondary pool. Seems a bit flaky.

The pool works fine when I add it directly to cgminer.conf and bypass the proxy.

I'm running Litecoin BAMT 1.4.

Thanks.

Bump.

Has nobody had similar problems?