Quote from: apple_talk on April 03, 2014, 11:07:28 PM

Quote from: apple_talk on April 03, 2014, 07:07:50 PM

Quote from: DJstone on April 03, 2014, 06:13:33 PM

Quote from: apple_talk on April 03, 2014, 05:53:30 PM

Quote from: DJstone on April 03, 2014, 05:05:07 PM

Quote from: apple_talk on April 03, 2014, 05:03:13 PM

running latest SPH-SGMINER .98 version for dark coin & getting no monitor.

rebuild so many times with updated ADL SDL .h files.

290 & 290X GPUs

when using sgminer 4.1.0 (in scrypt), no issues with hardware monitoring, temp, fan.

did you run:

autoreconf -fvi
./configure CFLAGS="-O2 whatever you depend on"
make

??

I also Ran test cmd
aticonfig --adapter=1 --od-getclocks && aticonfig --adapter=1 --od-gettemperature
This confirms hardware is working.

Used this

./autogen.sh
./configure --enable-opencl --disable-adl
make
make install

Also tried...
./autogen.sh
./configure CFLAGS="-O3" --enable-opencl --enable-adl
make
make install

Not CFLAGS="-O3 ...."

CFLAGS="-O2 ..." !!!!

Pls try exactly this, without anything more or less.

This all is only working if you copied the ADL-Header files from your ADL-Download into sgminer/ADL_SDK (Build-Directory).

then in your build-directory run:

autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native"
make

that's it.

Tried
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native"
make

sgminer 4.1.0-98-ga683 - Started: [2014-04-03 15:05:52]
--------------------------------------------------------------------------------
(5s):1.447M (avg):2.011Mh/s | A:0 R:0 HW:0 WU:0.000/m
ST: 10 SS: 0 NB: 1 LW: 0 GF: 0 RF: 0
Connected to Pool 0 (longpoll) diff 424 as user vcoinrpc
Block: 4a9731f1... Diff:424 Started: [15:05:51] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [ S ]ettings [D]isplay options [Q]uit
GPU 0: | 799.4K/997.3Kh/s | R: 0.0% HW:0 WU:0.000/m I:18
GPU 1: | 864.0K/1.098Mh/s | R: 0.0% HW:0 WU:0.000/m I:18
--------------------------------------------------------------------------------
[15:05:48] Started sgminer 4.1.0-98-ga683
[15:05:48] Loaded configuration file /opt/ifmi/cgminer.darkcoin.conf
[15:05:49] Kernel darkcoin is experimental.
[15:05:49] Kernel darkcoin is experimental.
[15:05:49] Kernel darkcoin is experimental.
[15:05:50] Kernel darkcoin is experimental.
[15:05:50] Kernel darkcoin is experimental.
[15:05:50] Kernel darkcoin is experimental.
[15:05:50] Kernel darkcoin is experimental.
[15:05:51] Kernel darkcoin is experimental.
[15:05:51] Probing for an alive pool
[15:05:51] Network diff set to 424
[15:05:51] No suitable long-poll found for http://192.168.1.99:12345
[15:05:57] API bind to port 4028 failed - trying again in 30sec

When running sgminer...
sgminer 4.1.153-63-g10ec - Started: [2014-04-03 19:02:50]
--------------------------------------------------------------------------------
(5s):1.677M (avg):1.598Mh/s | A:0 R:0 HW:0 WU:1674.3/m
ST: 1 SS: 0 NB: 2 LW: 42 GF: 0 RF: 0
Connected to sf.clevermining.com (stratum) diff 512 as user XXXXXXXXXXXXXXXXXXXXXXXXXXXX
Block: e47ee237... Diff:48.6M Started: [19:02:55] Best share: 220
--------------------------------------------------------------------------------
[P]ool management [G]PU management [ S ]ettings [D]isplay options [Q]uit
GPU 0: 73.0C 2050RPM | 666.9K/909.4Kh/s | R: 0.0% HW:0 WU: 979.0/m I:18
GPU 1: 61.0C 2410RPM | 636.0K/869.4Kh/s | R: 0.0% HW:0 WU: 848.6/m I:18
--------------------------------------------------------------------------------
[19:02:43] Started sgminer 4.1.153-63-g10ec
[19:02:43] Loaded configuration file /opt/ifmi/cgminer.conf
[19:02:44] Initialising kernel ckolivas.cl with bitalign, unpatched BFI
[19:02:44] Initialising kernel ckolivas.cl with bitalign, unpatched BFI
[19:02:44] Probing for an alive pool
[19:02:49] sf.clevermining.com difficulty changed to 512
[19:02:50] Network diff set to 46.9M
[19:02:55] API running in IP access mode on port 4028 (11)
[19:02:55] Network diff set to 48.6M
[19:02:55] Stratum from sf.clevermining.com detected new block

deleted sph-sgminer folder

Yesterday I did another fresh pull using git.
updated ADL_SDK .h files into include folder.
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native"
make

same result, btw, it still showed .98 version, I thought their is a version update?