hi dishwara, I let CPUminer run for an hour, and while I'll get hashes within the restart, after the first few minutes, I get 0Kh showing on Web dashboard (not DOS console).
I also only get a bunch of screens (the screens after the first one). I left cpuminer running and it's still running as I type this, but webdashboard shows 0Kh.
And I can't use cgminer for reason I posted on long wall of text, with TL;DR as well. I will let CPUminer run for several hours, but I doubt it will change. All I get is dispatching new work statuses.
Then I have to reboot, and recheck my config:
minerdOC.exe --freq=800 --gc3355=\\.\COM5 --url=stratum+tcp://ltc.give-me-coins.com:3334 --userpass=weminedead.1:x
Have you verified that the Gridseed is still on COM5 after reboot? Unplug it, check Device Manager, re-plug it, check again which COM port appeared.
hi suchmoo, Yes I did. I remove USB, and reconnect it directly to PC and checked the COM port. I noticed that if I used the wrong COM port, that the software won't event start, i.e. the console will say that opening port failed. In my case, it opens, just that it will accept shares erratically.