Quote from: Mr. Jinx on April 05, 2014, 09:27:43 AM

Quote from: Luke-Jr on April 05, 2014, 09:05:08 AM

How's it work for others who have been using them in production?

I'm running this for a while now with good results:

Code:

bfgminer version 3.99.0 - Started: [2014-04-04 21:06:45] - [ 0 days 12:18:32]
[M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit
Connected to x diff 1m with stratum as user x
Block: ...b53afe02 #544104 Diff:5.75k (41.13Gh/s) Started: [09:24:58]
ST:102 F:0 NB:305 AS:0 BW:[ 3/ 0kB/s] E:0.00 I:11.33mBTC/hr BS:196
0 | 6.95/ 7.01/ 6.21Mh/s | A:26713 R:2704+0(8.6%) HW:17/none
------------------------------------------------------------------------------------------------------
GSD 0: | 338.6/348.9/264.6kh/s | A: 1138 R: 119+0(none) HW: 0/none
GSD 1: | 346.6/350.5/323.2kh/s | A: 1388 R: 128+0(none) HW: 0/none
GSD 2: | 344.4/351.1/320.7kh/s | A: 1383 R: 135+0(none) HW: 0/none
GSD 3: | 339.4/349.2/283.3kh/s | A: 1207 R: 111+0(none) HW: 0/none
GSD 4: | 338.4/350.2/300.9kh/s | A: 1303 R: 147+0(none) HW: 0/none
GSD 5: | 345.4/350.6/316.2kh/s | A: 1359 R: 155+0(none) HW: 0/none
GSD 6: | 345.4/351.0/330.8kh/s | A: 1431 R: 142+0(none) HW: 0/none
GSD 7: | 356.6/350.8/334.8kh/s | A: 1435 R: 132+0(none) HW: 0/none
GSD 8: | 343.9/350.6/329.5kh/s | A: 1415 R: 122+0(none) HW: 0/none
GSD 9: | 349.7/350.1/303.3kh/s | A: 1314 R: 116+0(none) HW: 0/none
GSD10: | 347.2/349.6/295.9kh/s | A: 1272 R: 143+0(none) HW: 0/none
GSD11: | 357.0/350.5/307.9kh/s | A: 1332 R: 144+0(none) HW:12/none
GSD12: | 344.4/348.9/271.1kh/s | A: 1167 R: 116+0(none) HW: 0/none
GSD13: | 339.6/350.2/318.7kh/s | A: 1358 R: 130+0(none) HW: 0/none
GSD14: | 352.7/350.3/310.1kh/s | A: 1330 R: 164+0(none) HW: 0/none
GSD15: | 344.9/350.5/317.0kh/s | A: 1372 R: 148+0(none) HW: 0/none
GSD16: | 347.0/350.2/312.9kh/s | A: 1342 R: 130+0(none) HW: 1/none
GSD17: | 342.5/351.2/335.5kh/s | A: 1440 R: 156+0(none) HW: 0/none
GSD18: | 344.6/350.6/316.4kh/s | A: 1350 R: 129+0(none) HW: 4/none
GSD19: | 351.0/351.1/320.8kh/s | A: 1387 R: 138+0(none) HW: 0/none
------------------------------------------------------------------------------------------------

This is on p2pool so rejects are a bit high. Only wish for now is individual freq settings.
Right now it's running gridseed-support-clean branche. With the default branche the hashrates looked higher (but maybe it is more accurate now?).

Hey can you actually tell me at which hashrate they run and with which options ?
I run them at 1150mhz all overclocked, but i got the problem that my actual hashrate is about 50% lower than with cgminer..

I am also using the gridseed-support-clean branche.