Quote from: n0nce on Today at 12:33:42 AM

Quote from: xraid on November 30, 2022, 09:16:39 PM

also if somebody here is handy with 3d-printing ? well even answer if it could be done with a 3d-print.

I do; could give that thing a try..

However only looks like a breakout board like mine; I don't understand where to get STL files for printing?
There should be some kind of 3D printed piece holding the chip on through pressure. Would be pretty sweet. If someone has a working model, I would print them for free for the sake of Bitaxe development (or other open-source miner evolving from this).

We would need make a design or 3 -and draw it / test print

-i see a bottom base plate with a 0.8 * 0.8 * depth(?) indentation.

-and a lid where PCB-breakout is mounted, the lid could have a overhang with sides when placed over base, the overhang-sides could have m3 machine screw adjustments ? if the 3d-print could not be made exact, the threads for the adjustment-screws would be made after print.

-no hinges for lid ? , but weight of lid could maybe be sufficient make contact ? or the overhang sides of lid could almost meet the base where magnets could pull.

well any design that works will float my boat ...

then maybe a esp32 with display to drive some test confirming chip is operational