Quote from: n0nce on Today at 01:50:38 PM

@gergar What do you think about using 2 fans (1x intake, 1x exhaust)? I mean, the downsides of having ports on the back now is that it's not really possible, but maybe a small fan that covers part of the back side could help.
Or using 2 fans in the front. That did wonders on my Apollo.

it will help but in reality the way cables are today might need very small fans and to have a proper push-pull setup fans must be similar in cfm and pressure capacities (i tried some noctua 40x25mm and are large to fit) so i ordered som 6k 80mm fans from amazon one 25mm and other that is 38mm but cfm is 3x the current but noise will the the issue with these but i want to test how will it help.

this is the 38mm
https://www.amazon.com/Wathai-Cooling-80mm-Speed-Bearing/dp/B07QX3QCP5
this is the 25mm that fits with mo issues but you need in both an adaptor (link also included)
https://www.amazon.com/GDSTIME-80mm-25mm-Brushless-Cooling/dp/B00N1Y50QQ
the adaptor
https://www.amazon.com/Mainboard-Standard-Extension-Power-Cable/dp/B07Z8Z182S

once i get them netx week let me test it and i can report back so you dont throw away money i can try to set a push-pull using the original fans i just need to get some very large bolts/nuts to use the top bolts from the current fan to secure the front ones just i need to do some measuring to avoid bending too much the power and usb cable as i am using an atx 1600w pc psu and the pcie cable doesnt bend too much.

hope it makes sense to you.