Quote from: unicornmangle on Today at 09:47:01 AM

Is it ok to daisy chain the apollos power connectors on the back of apollos? example 1 apollo gets 1 pci-e plugged into power and the other power port on that apollo feeds 1 power port on another apollo?

Or can i use usb C with like a 100w wall adapter to power both units? I have these really underclocked and only using 30w per board.

The USB C probably has no way of getting the current where it needs to go without frying something. Or rather, It cannot power the hashboards at all.

But if you really have reduced the power per Apollo to 30W (how do you do that?), then maybe the daisy-chaining could work.

At 280W ( = 100% power) you would have about 280W / 12V / 2 connectors = 11.66A flowing through each connector on one Apollo.

At 2 x 30W = 60W you would have 60W/12V = 5A going into the one connector on the first Apollo, and 30W/12V = 2.5A for the rest of the way to the second Apollo.

That seems feasible to me.

Why not run one Apollo at 120W instead?