Quote from: NotFuzzyWarm on Today at 08:59:55 PM

^^ The real question is how much current can the hub provide per-port. At those speeds each one is pulling at least 2.8a and possibly just over 3.1a.

If the Eyeboot holds to usb charging specs each port will be limited to a maximum of 3.1a. Yes the entire Eyeboot hub can provide 10a but that has to be distributed across many ports.

The original Gekkp hub had 3-banks of 2 ports with each bank fed by a 6a regulator - if just powering 1 in each bank it will happily supply that full 6a to it. The connectors may melt but that's what you get. The new hubs use a single 25a regulator feeding each port through 3.5a resetable PTC e-fuses. Yes that means each port is limited to under 3.5a but that more than enough for reasonable OC with minimal danger of melting the port connectors

Thanks for this. Made me realize, I was running both sticks side by side on the Eyeboot. One was consistently underpowered and cutting out, staggering them in the hub solved this issue. Now running both at 550Mhz flawlessly. I'm thinking three at this speed might be possible.