Quote from: 2GOOD on April 13, 2014, 09:57:23 PM

Disclamer: This topic is only for Technobit Boards, for original cgminer support please visit: https://bitcointalk.org/index.php?topic=28402.0

With the help of "farmdve" from the Bulgarian Bitcoin forum BitcoinBG.eu here it is, the windows build of cgminer supporting Technobit boards like HEX16A2, HEX16B/B2, HEX8A1 etc.

Step by Step guide:
Updated: 29.12.2014

1. Files to download:
Zadig: http://zadig.akeo.ie/downloads/zadig_2.1.0.exe
Cgminer: http://bitcoinbg.eu/tools/technobit/cgminer_technobit_win_0_4_1b.zip
Cgminer Dice Version - Latest: http://bitcoinbg.eu/tools/technobit/cgminer_technobit_win_0_4_1_DICE.zip

EDIT 21.7.2017: Updated links for cgminer win https://mega.nz/#F!qIIXGbAY!VqmgqasZJz-FiYAMS5RDWQ

2. Connect the board don't install any drivers if asked

2.1. If you had installed previous com drivers from technobit the device will be recognized as COM port in device manager:

Leave it like this

3. Right Click on Zadig -> Run As Administrator

3.1. Go to Options and Check "List All Devices"

3.2. From the dropdown menu find the Technobit device connected

3.3. Click "Replace Driver", after installation finish click "Close"

3.4. Check if the driver is installed correctly, choose the board again from the dropdown menu, you should see something like this:

In device manager it is under Universal Serial Bus devices:

If you see this than your device is properly installed.

4. Extract the archive and just run cgminer.exe to test your installation

4.1 Edit cgminer.conf to suit your needs, the config file is with common settings for all supported devices.
you need Notepad++ to see linebreaks in cgminer.conf

5. Run cgminer.exe, if the board is not detected or you get some errors just replug it.

5.1 /not needed anymore/ In case that the board is still not recognized after replugging the usb cable, try edit the cgminer.conf field corresponding to your board:

Code:

"set_default_to_c" : false,

change to

Code:

"set_default_to_c" : true,

Here we go Wink

This version is tested and runs on everything from Technobit except HEX16A, you can check my reviews of the boards for settings:
HEX16A2 (HEXc)
HEX16B (HEXb)
HEX16B2 BitFury2 (HEXb)
HEX8A1 260GH (HEX8)
HEX8A1 130GH (HEX8)
HEX4M 400GH (HEXM)
HEX4R - Spondoolies RokerBox
HEX16A4 - Avalon 4

Not tested with mixed boards.

Cgminer for !!! ONLY !!! HEX16A !!! ONLY !!!
1. Files to download:
Cgminer: http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer-hex16a.rar
You need to remove zadig for HEX16A boards

here is a screenshot:

best
2GOOD