Quote from: mikeywith on June 17, 2023, 07:21:27 PM

But in the first kernel log he posted it was not showing 0 asic for the bad hashboard, which is why we started talking about the EPROM, if shows 0 asic then that is a different story, it is likely the hashboard is dead and needs repair, in other words, it is unlikely to be software related.

Opppsss.... that was my mistake I didn't review the previous logs I thought that I saw it on the image but the image only shows that the first hashboard is abnormal.

Quote from: deafgoose on Today at 01:08:21 AM

I got my sd-card adapter. Apparently its USB 3.0 but luckily 3.0 is backwards compatible all the way down to 1.1.

I flashed the image onto the adapter, stuck it in, booted it up and nothing. I go to the ip address and its still the old firmware.

From my understanding, it should have auto-installed after boot-up...

You might did it wrong that is why the version didn't change and sometimes fake SD card have fake voluke that can turn some files corrupted so try to re place a SD card.

Also there is a detailed guide on how to flash this unit through OTG/SD card check this link below

- https://support.bitmain.com/hc/en-us/articles/4404919472281-S19j-S19j-Pro-control-board-program-recovery-SD-card-flashing-

If still didn't work then like other said and my previous post boot it with Braiins OS you can che the guide below how to boot or flash the miner with Braiins.

- https://docs.braiins.com/os/plus-en/Setup/1_quickstart.html#install-braiins-os