Quote from: M_h_MDark on Today at 01:31:38 PM

hey skot, I need the pinouts and possibly the datasheets for BM1387 and also the register map, would you be able to help?

The closest thing to a register map I found is this

Code:

package axi_bm13xx_pkg;

// ---------------------------------------------------------------------------------------------
// clock parameter
time CLK_PERIOD = 20ns;

// ---------------------------------------------------------------------------------------------
// Definition of IP core AXI interface
// ---------------------------------------------------------------------------------------------

// IP Core Version Register, read-only
parameter VERSION = 32'h0000;
// Build ID Register, read-only
parameter BUILD_ID = 32'h0004;
// Control Register, read/write
parameter CTRL_REG = 32'h0008;
// Status Register - reserved, read-only
parameter STAT_REG = 32'h000C;
// Baudrate Divisor Register, read/write
parameter BAUD_REG = 32'h0010;
// Work Time Delay Register, read/write
parameter WORK_TIME = 32'h0014;
// Error Counter Register, read-only
parameter ERR_COUNTER = 32'h0018;
// Command Receive Interface FIFO, read-only
parameter CMD_RX_FIFO = 32'h1000;
// Command Transmit Interface FIFO, write-only
parameter CMD_TX_FIFO = 32'h1004;
// Command Control Register, read/write
parameter CMD_CTRL_REG = 32'h1008;
// Command Status Register, read-only
parameter CMD_STAT_REG = 32'h100C;
// Work Receive Interface FIFO, read-only
parameter WORK_RX_FIFO = 32'h2000;
// Work Receive Control Register, read/write
parameter WORK_RX_CTRL_REG = 32'h2008;
// Work Receive Status Register, read-only
parameter WORK_RX_STAT_REG = 32'h200C;
// Work Transmit Interface FIFO, write-only
parameter WORK_TX_FIFO = 32'h3004;
// Work Transmit Control Register, read/write
parameter WORK_TX_CTRL_REG = 32'h3008;
// Work Transmit Status Register, read-only
parameter WORK_TX_STAT_REG = 32'h300C;
// Work Transmit IRQ Threshold, read/write
parameter WORK_TX_IRQ_THR = 32'h3010;
// Work Transmit Last Work ID, read-only
parameter WORK_TX_LAST_ID = 32'h3014;

// ---------------------------------------------------------------------------------------------
// Control Registers
// ---------------------------------------------------------------------------------------------
// Enable support for chips BM1391, BM1397
parameter CTRL_BM139X = 32'h10;
// Enable, read/write
parameter CTRL_ENABLE = 32'h8;
// Number of midstates per work, encoded as log2 of values: 1, 2, 4, read/write
parameter CTRL_MIDSTATE_1 = 32'h0;
parameter CTRL_MIDSTATE_2 = 32'h2;
parameter CTRL_MIDSTATE_4 = 32'h4;
// Clear error counter, write-only
parameter CTRL_ERR_CNT_CLEAR = 32'h1;
// Enable interrupt, read/write
parameter CTRL_IRQ_EN = 32'h4;
// Reset/clear Transmit FIFO, write-only
parameter CTRL_RST_TX_FIFO = 32'h2;
// Reset/clear Receive FIFO, write-only
parameter CTRL_RST_RX_FIFO = 32'h1;

// ---------------------------------------------------------------------------------------------
// Status Registers - read-only
// ---------------------------------------------------------------------------------------------
// Interrupt pending for Work Receive FIFO
parameter STAT_IRQ_PEND = 32'h10;
// Work Interface Transmit FIFO Full
parameter STAT_TX_FULL = 32'h08;
// Work Interface Transmit FIFO Empty
parameter STAT_TX_EMPTY = 32'h04;
// Work Interface Receive FIFO Full
parameter STAT_RX_FULL = 32'h02;
// Work Interface Receive FIFO Empty
parameter STAT_RX_EMPTY = 32'h01;

endpackage : axi_bm13xx_pkg