Quote from: BitMaxz on October 04, 2023, 11:00:37 PM

The error might be an incompatibility issue since you said the EEPROM you flashed came from another unit am I right?

It won't work you need an EEPROM that came from another dashboard but on the same unit.

The hashboard must be synced if the serial numbers are different the control board won't recognize it.

There is a way to bypass this if you don't have Eeprom backup on that unit.
To bypass this you need to boot this unit with Braiins OS.

I will explain from the start. I have started to repair my own hashingboards. After many hours of testing and learning, I start to see some results.

I now have 3 s17PRO hashboards that find all the chips. I use the chinese universal antminer test fixture. You have different files on sd card`s that you need to put in the test fixture depending on the hashboard model.

I use Braiins and have put in one card at the time in the miner to see if the card works.

But with all repaired boards I get this eeprom message in the kernel log.

I read something that the test fixture overwrite the eeprom or maybe it was the pic file on the board, and you need to restore it again after repaired the board.

Is that right. I have pickit 3.5 and the antminer code editor. What do I need to do so the miner recognize and start to hash with the repaired boards.

For example, I see that I dont know the different between the eeprom and pic file.

Thanks in advance!

/Magnus