Quote from: sandor111 on April 26, 2014, 12:08:33 AM

Quote from: Ranma13 on April 25, 2014, 11:32:17 PM

Quote from: pauljbl on April 25, 2014, 10:19:26 PM

Santor I dont quite get the syntax on the settings for freq

--freq=850 --gc3355-freq=/dev/ttyACM0:900

Why is freq 850 used then 900

Thanks

--freq=850 is the setting the clock speed for all the Gridseeds.
--gc3355-freq=/dev/ttyACM0:900 is setting the clock speed for a specific Gridseed. If you have multiple, you can set them like so: =/dev/ttyACM0:900,/dev/ttyACM1:850,/dev/ttyACM2:950

You can use either. I don't know what'll happen if you use both though, presumably the --gc3355-freq is more specific and will override whatever is set on --freq. If this is the case, you can set a default clock speed for all the Gridseeds and override a few that need to be set differently.

And if you want to be more specific, you can set the frequency of a specific GC3355 chip:

Code:

--gc3355-freq=/dev/ttyACM0:900,/dev/ttyACM0:875:4

-> that will set the frequency of chip 0-3 (0-3 & 5-39 for G-Blade) of the miner @ ttyACM0 to 900, and chip 4 will be set to 875.

SandorII thanks for the hard work on the miner software. Just updated to the version before this one, and it made a huge difference on Windows. What the Miner said and what the Pool is reporting are Much closer now.

Quick question, on Windows the above would be freq=\\.\com3:900,\\.\com3:875:4 ?
and is autotune going to get that specific when it tunes for best freq??

Again thanks..El