Quote from: cevad on April 27, 2014, 05:16:41 AM

Got out my antminer s1 today, and it doesn't appear to allow the load balance from stock - am running latest firmware. Am hoping that my proper powersupply will arrive tomorrow, so that I can leave my s1 running all the time, need to start making some ROI.

Will reinvestigate once I have S1 set up and running 24/7

You can check if the settings are there on your S1.

ssh to the Antminer S1 as root and copy and paste the commands below:

Code:

clear
cat /etc/config/cgminer
cat /etc/init.d/cgminer |grep POOL1

Here's the results that show --load balance with quota

config cgminer 'default'
   option chip_frequency '282'
   option miner_count '24'
   option api_allow 'W:127.0.0.1'
   option more_options '--quiet --load-balance'
snipped....
    POOL1="-U $_pool1url -O $_pool1user:$_pool1pw"
   #PARAMS=" --lowmem $AOPTIONS $POOL1 $POOL2 $POOL3 $_pb --api-allow $_aa --api-listen"
   PARAMS="$AOPTIONS $POOL1 $POOL2 $POOL3 $_pb $_mo --api-listen --api-network"

Good luck.