Hello friends.
I have 3 miners L3+ (vnish 3.9.1):
miner.1 340 MH/s
miner.2 170 MH/s
miner.3 370 MH/s
How and what difficulty should I set in miners and how to do it using my workers as an example? Or leave it automatic?
cryptori, flash blissz firmware to your L3's, set frequency to 425 and voltage to 13 (bitmain default).
then they make 580 MH/s each if all chains are good
I have expensive electricity and a consumption limit. Therefore, I reduced the voltage of the power supply from 12 to 8.5 volts. It turned out to be 1.03 W / MH, 30% more economical than at 12 volts.
iTechx8xgsy.x1 507.4 MH/s
iTechx8xgsy.x2 689.3 MH/s
iTechx8xgsy.x3 428.0 MH/s
iTechx8xgsy.x4 775.8 MH/s
my L3's