Quote from: brontolo10 on April 17, 2025, 03:14:39 PM

Hi guys,
I have update my two luckyminer Lv07 with the last stabile 2.6.1 firmware from https://github.com/mrbonkerz/ESP-Miner-LVXX with 575Mhz/1.200v setup.

I use the factory fan with manual setup to 85% speed: the Asic temp Is 49/50 C. I replaced the noctua 12v because It not works well: It runs at max 2000 RPM, too low.

Also I am testing the new luckyminer LG07 Scrypt: It works very good on molepool on LTC+DOGE+BELL.
This miner works on 650Mhz/6.50v with a very low temp of 38 C for 11M hashing and 10w.
I replaced the fan with a noctua 12v that run below 2000 RPM, very silent miner...

B10

Can you provide some of the log from the LG07? I'm curious what version of firmware they are running.