Quote from: ChuckBuck on May 07, 2014, 10:07:42 PM

Quote from: philipma1957 on May 07, 2014, 09:36:22 PM

Quote from: kabopar on May 07, 2014, 09:26:35 PM

Quote from: cnapsys on May 07, 2014, 09:08:02 PM

cool.

ty so much.

Guess this one is set up and hashing away...

will set up the 2nd one when I get back home.
Is there anything I need to look out for when setting the 2nd ant???
have not opened it yet but I'm assuming it has a different ip on the sticker? Huh

No, if it is a new one it will probably have the same fixed IP (192.168.1.99). The easiest way is to modify the one that you already have running (login to the web gui, Network tab, Interfaces tab (comes up first) then edit the WAN interface IP (IPv4 address box, change value from 192.168.1.99 to for example 192.168.1.98), click 'save & apply', then be patient as it takes a few minutes (if stuck do a System reset).
If you try to run both S1's on the same WAN IP address you are looking for trouble. You also need to make sure that there are no IP address clashes with existing devices on your network (if your router has a feature to assign specific IP addresses, then use that to assign the S1's the same addresses as the fixed ones that you selected, this will prevent future clashes).

Cheers

there is a free ip scan link somewhere for windows maybe someone can post it.

This is one.

Advamced Ip Scanner:

http://www.advanced-ip-scanner.com/

yes that is the one thank you for posting the link.