Quote from: techman05 on May 10, 2014, 12:33:16 AM

Quote from: dogie on May 09, 2014, 06:05:03 PM

Quote from: wedgy2k on May 09, 2014, 05:53:25 PM

Hi
As the temperature is rising, so is the noise and temps of my S1's

Do you know of i could add these at either end of my S1's in a push / pull formation
http://www.corsair.com/en/air-series-sp120-pwm-high-performance-edition-high-static-pressure-fan-twin-pack

hopefully reduce the noise and the temps
I currently have temps of 50c and a fan speed of 3240 (OC'ed to 375 190GHs ish) which is getting a bit annoying now - I can even hear them echoing in my head when I'm at work lol

Yep, will get about 6C off the temps. Alternatively if you only have a few you can do the cooling mod (reverse both boards so the heatsinks both face outwards, then 2x120mm per blade blowing directly onto each heatsink).

Just fyi I was in the thought to do this and bought titan fans with 78 cfm. The problem with them was that the screws on both ends hit the fans. I was under the impression that the default fan used 103+- cfm . I'd hope all I need to do is find a nice way to space the fans out so they don't hit.

I still hope like you seem to hope that putting fans in that position will quiet these antminer and keep them cooler.

Edit FYI #2 rubber screws work but stink at being easy to put in so borrowing one of the screws from an unaltered fan may be necessary unless you can use the rubber and the spacers.

Any idea what fans will report speed to the antminer?

If you look at the screws on the fan side of the miner, one of them is not a hex and sits flatter, if you found more screws like that from old pc parts, you could try replacing them and the fans shouldn't knock against them.