Quote from: chinatom on May 24, 2014, 09:50:16 PM

How can i set my device(g-blade) 0,1,2,3 to 800MHZ and 4,5 to 838MHZ...

if i set may 838mhz to
ttyACM0,1,2,3 many hw... so said.. but 4,5 is very fine 0 hw.

PLZ HELP

it works fine with blades. you need to specifiy freq for each and every chip though.

simply build out a list of all your serial# and specifiy the speed for each chip as in my example below then paste it into the extra options box.

its going to be very very long, but it works perfectly

Code:

--gc3355-freq=48FE864B3634:862:0,48FE864B3634:862:1,48FE864B3634:862:2,48FE864B3634:862:3,48FE864B3634:862:4,48FE864B3634:862:5,48FE864B3634:862:6,48FE864B3634:862:7,48FE864B3634:862:8,48FE864B3634:862:9,48FE864B3634:862:10,48FE864B3634:862:11,48FE864B3634:862:12,48FE864B3634:862:13,48FE864B3634:862:14,48FE864B3634:862:15,48FE864B3634:862:16,48FE864B3634:862:17,48FE864B3634:862:18,48FE864B3634:862:19,48FE864B3634:862:20,48FE864B3634:862:21,48FE864B3634:862:22,48FE864B3634:862:23,48FE864B3634:862:24,48FE864B3634:862:25,48FE864B3634:862:26,48FE864B3634:862:27,48FE864B3634:862:28,48FE864B3634:862:29,48FE864B3634:862:30,48FE864B3634:862:31,48FE864B3634:862:32,48FE864B3634:862:33,48FE864B3634:862:34,48FE864B3634:862:35,48FE864B3634:862:36,48FE864B3634:862:37,48FE864B3634:862:38,48FE864B3634:862:39,48FD8F593634:850:0,48FD8F593634:850:1,48FD8F593634:850:2,48FD8F593634:850:3,48FD8F593634:850:4,48FD8F593634:850:5,48FD8F593634:850:6,48FD8F593634:850:7,48FD8F593634:850:8,48FD8F593634:850:9,48FD8F593634:850:10,48FD8F593634:850:11,48FD8F593634:850:12,48FD8F593634:850:13,48FD8F593634:850:14,48FD8F593634:850:15,48FD8F593634:850:16,48FD8F593634:850:17,48FD8F593634:850:18,48FD8F593634:850:19,48FD8F593634:850:20,48FD8F593634:850:21,48FD8F593634:850:22,48FD8F593634:850:23,48FD8F593634:850:24,48FD8F593634:850:25,48FD8F593634:850:26,48FD8F593634:850:27,48FD8F593634:850:28,48FD8F593634:850:29,48FD8F593634:850:30,48FD8F593634:850:31,48FD8F593634:850:32,48FD8F593634:850:33,48FD8F593634:850:34,48FD8F593634:850:35,48FD8F593634:850:36,48FD8F593634:850:37,48FD8F593634:850:38,48FD8F593634:850:39,48DE606C3731:838:0,48DE606C3731:838:1,48DE606C3731:838:2,48DE606C3731:838:3,

there are 40 chips per blade numbered 0-39. each one needs to be included per blade you want to modify. If you only want to modify 1 or 2 blades away fromthe default 850 then you only need to specify those in the string. any blades not in the string will default to 850.