Damn your config is a hot mess. What did you get this at? Like I don't even know where to start.

You can't use intensity,xintensity, and rawintensity.. It doesn't work like that, Just choose one. I don't know what a good number is for your cards

Your look up gap needs to be set to 2.

set your gpu-threads to 2

Your setting your GPU engine to 0 Mhz.. Well not actually but its messed up. Either remove that flag or set the clocks via Sapphire TRIXX or MSI Afterburner. Same thing for gpu-memclock and gpu-vddc.

Set your temps a lot lower. temp-target is fine at 75, temp over-heat I'd say 80, and cut off at 85... but on this kernel it doesn't even get that hot. You also need to set your fan speed via software or in your configuration. Look at my post- https://bitcointalk.org/index.php?topic=623409.msg7008775#msg7008775

That config isn't for your card but it will give you a idea what it should look like. Also downgrade your drivers to 13.12, you'll thank me later