Quote from: jjj0923 on June 03, 2014, 04:11:06 PM

for me there are a lot of unanswered questions.

1 -instruction for setup - where are they?
2 - does this thing come with a built in rasberry controller? - unanswered
3 - power plugs on back are 8 pins - do we plug our 6 pin gpu plug only or 6+2 when possible - unanswered
4 - can a static IP address be set - unanswered
5 - is this thing using controlla software - if so - where the link to the new software

many questions....

does anyone know these answers?

Well spotted Sir.

hashra.com/support/ will very soon have firmware and set up guide. : )
We will not sleep. : )

Everyone will have an SD card loaded with firmware anyway but we will make sure it is available to download also like we have done in the past.

The pins on the back are 8pin sockets but you need to use 6pin cables for it.
If you try to use a 6+2pin to make it an 8pin it will not work in the miner.

As long as you use a good quality PSU with separate cables for each 6pin that will be fine. Modular PSU is best of course.